HPC MSU

Publications of the HPC²

Publications by HPC centers and institutes include items from past years such as an early publication written by one of the HPC founding investigators, Dr. Joe Thompson. Numerical Grid Generation was originally published by Elsevier Science Publishing Co., Inc. in 1985, and the copyright was transferred to Joe F. Thompson in 1997.

Search Publication Listings
Center:
Publication Type:
Research Working Groups:
Results Divided By Year
2012 2015 2016

Publications for: Bian
Peer-Reviewed Journals
Emelogu, A. A., Chowdhury, S., Marufuzzaman, M., Bian, L., & Eksioglu, B. (2016). An Enhanced Sample Average Approximation Method for Stochastic Optimization. International Journal of Production Economics. Elsevier. 182, 230-252. DOI:10.1016/j.ijpe.2016.08.032.

Poudel, S., Marufuzzaman, M., & Bian, L. (2016). A Hybrid Decomposition Algorithm for Designing a Multi-modal Transportation Network under Biomass Supply Uncertainty. Transportation Research Part E. Pergamon. 94, 1-25.

Yadollahi, A., Shamsaei, N., Thompson, S.M., Elwany, A., & Bian, L. (2016). Effects of Building Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel. International Journal of Fatigue. Elsevier. 1, 1. DOI:10.1016/j.ijfatigue.2016.03.014.

Emelogu, A. A., Marufuzzaman, M., Thompson, S.M., Shamsaei, N., & Bian, L. (2016). Additive Manufacturing of Biomedical Implants: A Feasibility Assessment via Supply-Chain Cost Analysis. Additive Manufacturing. Elsevier. 11, 97-113. DOI:10.1016/j.addma.2016.04.006.

Mahmoudi, M., Yadollahi, A., Elwany, A., Shamsaei, N., Thompson, S.M., & Bian, L. (2016). Mechanical Properties and Microstructural Characterization of Selective Laser Melted 17-4 PH Stainless Steel. Rapid Prototyping. Emerald Light. 1, 1. DOI:10.1108/RPJ-12-2015-0192.

Poudel, S., Marufuzzaman, M., & Bian, L. (2016). Designing a Reliable Biofuel Supply Chain Network Considering Link Failure Probabilities. Computers & Industrial Engineering. 91, 85–99. DOI:10.1016/j.cie.2015.11.002.

Aboutaleb, A., Bian, L., Elwany, A., Shamsaei, N., Thompson, S. M., & Tapia, G. (2016). Accelerated Process Optimization for Laser-Based Additive Manufacturing by Leveraging Similar Prior Studies. IISE. 49(1), 31-44.

Peer-Reviewed Conference Abstracts
Chowdhury, S., Emelogu, A. A., Marufuzzaman, M., & Bian, L. (2016). A Continuum-approximation Approach to Optimize Routing Decisions for Drones under Extreme Events. INFORMS Annual Meeting. Nashville, TN.

Poudel, S., Quddus, M. A., Marufuzzaman, M., Chowdhury, S., Smith, B. K., & Bian, L. (2016). Designing a Reliable and Congested Multi-modal Facility Location Problem for Bio-fuel Supply Chain Network. INFORMS Annual Meeting. Nashville, TN.

Chowdhury, S., Emelogu, A. A., Marufuzzaman, M., & Bian, L. (2016). An Enhanced Sample Average Approximation Technique to Solve a Two-stage Chance-constrained Optimization Problem. INFORMS Annual Meeting. Nashville, TN.

Aboutaleb, A. M., Bian, L., Elwany, A., & Tapia, G. (2016). An Optimum Design of Laser-based Additive Manufacturing Experiments by Leveraging Analogous Prior Data. INFORMS 2016. Nashville, TN: 2016 Best Refereed Paper Finalist Award—INFORMS Quality, Statistics, and Reliability Section.

Poudel, S., Quddus, M. A., Chowdhury, S., Marufuzzaman, M., & Bian, L. (2016). Stochastic Model for Locating Multiple Type Recharging Station under Flow Uncertainty. INFORMS Annual Meeting. Nashville, TN.

Emelogu, A. A., Chowdhury, S., Marufuzzaman, M., Bian, L., & Smith, B. K. (2016). Drone Routing and Optimization for Wildlife Surveillance. INFORMS Annual Meeting. Nashville, TN.

Emelogu, A. A., Chowdhury, S., Marufuzzaman, M., & Bian, L. (2016). Additive Manufacturing in a Biomedical Supply Chain: A Continuous Approximation Approach. INFORMS Annual Meeting. Nashville, TN.

Aboutaleb, A. M., Bian, L., Shamsaei, N., & Thompson, S.M. (2016). Systematic Optimization of Laser-based Additive Manufacturing for Multiple Mechanical Properties. 12th IEEE CASE (Conference on Automation Science and Engineering). Fort Worth, TX.

Aboutaleb, A. M., Bian, L., Shamsaei, N., Thompson, S.M., & Rao, P. (2016). Multi-objective Process Optimization of Additive Manufacturing: A Case Study on Geometry Accuracy Optimization. 27th International Solid Freeform Fabrication Symposium (SFF). Austin, TX.

Aboutaleb, A. M., Bian, L., Shamsaei, N., & Thompson, S.M. (2016). Multi-objective Process Optimization of Additive Manufacturing. Industrial & Systems Engineering Research Conference 2016. Anaheim, CA.

Peer-Reviewed Conference Papers
Aboutaleb, A., & Bian, L. (2016). An Optimum Design of Laser-based Additive Manufacturing Experiments by Leveraging Analogous Prior Data. 2016 INFORMS Best Paper Refereed Session, Quality Statistics and Reliability Division. Nashville, TN.

Aboutaleb, A., Bian, L., Shamsaei, N., & Thompson, S. (2016). Systematic Optimization of Laser-based Additive Manufacturing for Multiple Mechanical Properties. 2016 IEEE Conference of Automation Science and Engineering. Fort Worth, Texas.

Aboutaleb, A., Bian, L., Shamsaei, N., Thompson, S., & Rao, P. (2016). Multi-objective Process Optimization of Additive Manufacturing: A Case Study on Geometry Accuracy Optimization. 2016 International Solid Freeform Fabrication Symposium. Austin, TX.

Khanzadeh, M., Bian, L., Shamsaei, N., & Thompson, S. (2016). Porosity Detection in Laser-based Additive Manufacturing Using Melt Pool Morphology Clustering. 2016 International Solid Freeform Fabrication Symposium. Austin, Texax.

Khanzadeh, M., Marandi, T. S., Bian, L., Smith, B. K., Rao, P., & Thompson, S. (2016). Profiling and Optimizing the Geometric Accuracy of Fused Deposition Modeling via Self Organizing Map. 2016 International Solid Freeform Fabrication Symposium. Austin, TX.

Masoomi, M., Thompson, S., Shamsaei, N., & Bian, L. (2016). Effects of Inter-Layer Time Interval on Residual Stress Formation in Direct Laser Deposited Ti-6Al-4V. 2016 International Solid Freeform Fabrication Symposium. Austin, TX.

Shrestha, R., Simsiriwong, J., Shamsaei, N., Thompson, S., & Bian, L. (2016). Effect of Build Orientation on the Fatigue Behavior of Stainless Steel 316L Manufactured via a Laser-Powder Bed Fusion Process. 2016 International Solid Freeform Fabrication Symposium. Austin, TX.

Johnson, A., Shao, S., Shamsaei, N., Thompson, S.M., & Bian, L. (2016). Fatigue Behavior and Failure Mechanisms of Direct Laser Deposited Inconel 718. 2016 International Solid Freeform Fabrication Symposium. Austin, TX.

Shrestha, R., Simsiriwong, J., Shamsaei, N., Thompson, S.M., & Bian, L. (2016). Effect of Build Orientation on the Fatigue Behavior of Stainless Steel 316l Manufactured via a Laser-based Power Bed Fusion Process. Proceedings of the 2016 Annual International Solid Freeform Fabrication Symposium. Austin, TX.

Banghart, M., Bian, L., Strawderman, L., & Babski-Reeves, K. (2016). Our Bayesian Brain: Applications to Risk Analysis. Proceedings of the 2016 Industrial and Systems Engineering Research Conference. Anaheim, CA.

Banghart, M., Babski-Reeves, K., & Bian, L. (2016). Human Induced Variability during Failure Mode Effects Analysis (FMEA). Reliability and Maintainability Symposium (RAMS). Tucson, AZ: IEEE. DOI:10.1109/RAMS.2016.7448000.